# Picroft to Raspbian GUI
**URL:** https://community.openconversational.ai/t/picroft-to-raspbian-gui/8279
**Category:** Picroft
**Created:** [March 18, 2020, 11:25pm UTC](https://community.openconversational.ai/t/picroft-to-raspbian-gui/8279 "2020-03-18T23:25:41Z")
**Posts on this page:** 6
**Page:** 1
### Author:  [@crafael](https://community.openconversational.ai/u/crafael)
#### Post date: [March 18, 2020, 11:25pm UTC](https://community.openconversational.ai/t/picroft-to-raspbian-gui/8279/1 "2020-03-18T23:25:41Z")
Newb question but I’ve been trying to google this but haven’t found something concrete.
When I exit mycroft-cli-client and am transported back to the command line, how would I be able to access and startup the Raspbian GUI as I don’t want to be stuck on picroft when booting up?
Currently stuck at (.venu)pi@picroft:~$
Thanks!!
---
### Author:  [@baconator](https://community.openconversational.ai/u/baconator)
#### Post date: [March 19, 2020, 4:06am UTC](https://community.openconversational.ai/t/picroft-to-raspbian-gui/8279/2 "2020-03-19T04:06:32Z")
You’d have to install one. There’s several guides on doing this on the internet you can check out.
---
### Author:  [@crafael](https://community.openconversational.ai/u/crafael)
#### Post date: [March 19, 2020, 3:47pm UTC](https://community.openconversational.ai/t/picroft-to-raspbian-gui/8279/3 "2020-03-19T15:47:10Z")
I already installed Raspbian though through the microSD NOOBS on initial setup. After that I installed Picroft and now I’m having isssues switching back to Raspbian GUI. Does this make sense?
---
### Author:  [@baconator](https://community.openconversational.ai/u/baconator)
#### Post date: [March 19, 2020, 4:14pm UTC](https://community.openconversational.ai/t/picroft-to-raspbian-gui/8279/4 "2020-03-19T16:14:52Z")
did you burn the picroft image to the card?
---
### Author:  [@crafael](https://community.openconversational.ai/u/crafael)
#### Post date: [March 19, 2020, 4:48pm UTC](https://community.openconversational.ai/t/picroft-to-raspbian-gui/8279/5 "2020-03-19T16:48:18Z")
Yes I burned the picroft image to the card.
---
### Author:  [@baconator](https://community.openconversational.ai/u/baconator)
#### Post date: [March 20, 2020, 3:30am UTC](https://community.openconversational.ai/t/picroft-to-raspbian-gui/8279/6 "2020-03-20T03:30:31Z")
Doing that overwrites what was previously on the card.
Either you’ll need to do add a gui as mentioned above, or re-flash to raspbian with a gui and then do a git install of mycroft.