# Mycroft with Respeaker 2-Mic

**URL:** https://community.openconversational.ai/t/mycroft-with-respeaker-2-mic/7635
**Category:** This category is being retired - Support
**Created:** [December 6, 2019, 3:07am UTC](https://community.openconversational.ai/t/mycroft-with-respeaker-2-mic/7635 "2019-12-06T03:07:40Z")
**Posts on this page:** 1
**Showing post:** 22

<div class="post-metadata">

### Author: ![rlongfield](https://community.openconversational.ai/user_avatar/community.openconversational.ai/rlongfield/32/1934_2.png) [@rlongfield](https://community.openconversational.ai/u/rlongfield)
#### Post date: [December 10, 2019, 7:10pm UTC](https://community.openconversational.ai/t/mycroft-with-respeaker-2-mic/7635/22 "2019-12-10T19:10:49Z")

</div>

As Requested here is the extent of the files I edited and what was edited.

**/boot/config.txt**  
from

> `# Enable audio (loads snd\_bcm2835)  
> dtparam=audio=on  
> dtoverlay=i2s-mmap  
> dtparam=i2s=on

to

> `# Enable audio (loads snd\_bcm2835)  
> dtparam=audio=off  
> dtoverlay=i2s-mmap  
> dtparam=i2s=on  
> dtoverlay=seeed-2mic-voicecard

**/etc/mycroft/mycroft.conf**

> “play\_wav\_cmdline”: “paplay %1”  
> “play\_mp3\_cmdline”: “mpg123 %1”

**/etc/asound.conf**

> `# Use PulseAudio by default  
> pcm.!default {  
> type pulse  
> fallback “sysdefault”  
> hint {  
> show on  
> description “Default ALSA Output (currently PulseAudio Sound Server)”  
> }  
> }
> 
> ctl.!default {  
> type pulse  
> fallback “sysdefault”  
> }

**/etc/pulse/daemon.conf**

> resample-method = ffmpeg  
> default-sample-format = s24le  
> default-sample-rate = 48000  
> alternate-sample-rate = 44100

**/etc/pulse/default.pa**

> unload-module module-suspend-on-idle  
> unload-module module-role-cork  
> load-module module-role-ducking

> pactl set-default-sink 0  
> pactl set-default-source 1

---

_[View the full topic](https://community.openconversational.ai/t/mycroft-with-respeaker-2-mic/7635)._