# Mycroft with Respeaker 2-Mic

**URL:** https://community.openconversational.ai/t/mycroft-with-respeaker-2-mic/7635
**Category:** This category is being retired - Support
**Created:** [December 6, 2019, 3:07am UTC](https://community.openconversational.ai/t/mycroft-with-respeaker-2-mic/7635 "2019-12-06T03:07:40Z")
**Posts on this page:** 1
**Showing post:** 10

<div class="post-metadata">

### Author: ![j1nx](https://community.openconversational.ai/user_avatar/community.openconversational.ai/j1nx/32/1260_2.png) [@j1nx](https://community.openconversational.ai/u/j1nx)
#### Post date: [December 8, 2019, 11:58am UTC](https://community.openconversational.ai/t/mycroft-with-respeaker-2-mic/7635/10 "2019-12-08T11:58:58Z")

</div>

I wonder if a similar trick as here;

> [@Picroft + rpi4 + Respeaker Mic Array v2.0 - Audio issues](https://community.openconversational.ai/t/picroft-rpi4-respeaker-mic-array-v2-0-audio-issues/7585/4):
>
> Looks like you are going to use this RPI4 only for this purpose so this is what I should do; First, make sure that you use PulseAudio for audio playback. Edit your “/etc/mycroft/mycroft.conf” or “~/.mycroft/mycroft.conf” to add/change to these two lines; "play\_wav\_cmdline": "paplay %1" "play\_mp3\_cmdline": "mpg123 %1" Pay good attention on the proper json format, using the comma’s where you should etc. Then we can also force ALSA userspace to use PulseAudio as well by editting the “/etc/asoun…

Might help you out. Especially the change in asound.conf to force everything to PulseAudio.

---

_[View the full topic](https://community.openconversational.ai/t/mycroft-with-respeaker-2-mic/7635)._